PD3.0/QC3.0快充诱骗板器快充触发器路由器光猫摄像头电源模块
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
产品特点:
1.本模块支持最常用的这两种快充协议:PD3.0、QC3.0/2.0;
2.本模块可以作为直流电源使用,比如将快充充电宝/充电器的电压诱骗出来;
3.可以让快充充电宝输出9伏/12伏给监控、路由器、光猫、风扇等供电;
4.使用方便,可以让监控、路由器、光猫、风扇等产品停电时也能正常使用;
5.方便使用,将某些传统直流供电的设备,变成TYPE-C口供电。
产品参数:
支持协议:PD3.0/QC3.0/2.0
电压档位:固定9V/12V/15V/20V四个档位
电流:5V(最大)
诱骗板尺寸:21*11.5*4mm
使用说明:
1、充电器/充电宝首先得支持PD3.0/QC3.0等通用快充,才能诱骗出电压。部分国产品牌大功率手机充电器是私有快充,无法诱骗!
2、诱骗板+外壳’选项外壳内部无灌胶,如客户需要可定制固定好电路板再发货,下单时请留言备注需要的电压值,谢谢![定制有数量限制,具体请咨询客服]
3、固定9/12/15/20伏四个档位,需要什么电压,将对应的焊盘短接起来就行了。
4、比如设置诱骗20V,但您充电器最高只有9V,那会自动降档诱骗输出9V。
5、最大支持5A,实际输出电流/功率由您的快充充电器和负载决定。
产品清单:
套装一:
1X模块
套装二:
1X模块
1X外壳