日本(Nidec)无刷电机带驱动板 可正反转 PWM调速 带电子刹车
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
库存散装的日本(Nidec)无刷电机带驱动板,电机可选择正反转,支持PWM信号调速,还带有电子刹车,小小的电机,却是功能非常齐全,它的输出齿轮是呈斜齿轮形状,它类型的无刷电机,常用于精密的办公设备上,如打印机,复印机,激光扫描仪............众多仪器设备上。
这批电机是没有原件包装的,据目测是全新的,但由于没有原件包装,所以无法保证每只电机的驱动板都是正常使用的,而且电机是没有配线的,要买家朋友自己找线的,所以特价处理,如果万一真的驱动板损坏,也可以直接从电机的三相线上焊接引线,外加无刷驱动板也能使用的,还有一定的利用价值的。
电机的驱动板上有接线端子的定义,最主要一点就是正负极严禁接反,如接错了是会烧坏驱动板的。
1 :+24V
2 :+24V
3 :GND
4 :GND
5 :刹车(接GND刹车,悬空放行)
6 :PWM(脉冲频率 10000 HZ 左右):
7 :方向(接GND切换转向)
8 :FG(悬空不接线就可以)
9 :MAKER(不知道用法,悬空不接线就可以)
10 :MON(不知道用法,悬空不接线就可以)
要注意电源线要最后导通,就是先接好PWM线等其他线,然后最慢接通电源,电机才能运转,如果先接通电源,然后再接通PWM线,电机是无法启动的。
电机重量 :185 克
我们随便挑了一只电机,直接焊接上线,按驱动板的接线定义,通电试机电机是能够正常运转的,我们的PWM脉冲频率选择 10000 HZ,然后用占空比可以调速,0%-90%有效,0%时转速最快,这只电机的功率不小的,转速也快,最高速应该是 5000 转以上的。但要注意电源线要最慢导通,电机才能启动,最主要的一点是驱动板的正负极严禁接反,接错了是会烧坏驱动板的。
再次提醒,我们这批电机是散装的,是不保证电机是能正常工作的,所以价格非常实惠,请介意的朋友慎拍。