3D打印适用于Apple Magsafe外接电池充电宝的手机支架14/15promax
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
本商品不接受买家用于其他平台转卖。否则卖家有不发货和和给予买家差评的权利。
所有收获地址为转运仓地址的请购买外贸版本,否则卖家有不发货和和给予买家差评的权利。
3D打印适用于Apple Magsafe外接电池充电宝的手机支架,适用于iPhone12、iPhone12pro、iPhone12promax、iPhone13、iPhone13pro、iPhone13promax、iPhone14、iPhone14pro、iPhone14promax、iPhone15、iPhone15pro、ihone15promax
可以充airpods pro 和airpods1、2.但是不能壳子太厚。
支架底部走线槽内有一块很小的塑料挡片,请视情况用刀片割到适合走线的宽度。
刀片脚垫请仔细找一下,丢了本店概不负责。由于包装内送刀片,会导致被拆包检查,检查的人搞丢脚垫是有可能的。
友情提醒:
这个线装入支架后一般情况下也就不拿出来了,你说你就一条线,又要充手机又要用这个支架,拿进拿出得也是闲的蛋疼。
因此支架尺寸是偏紧设计的,某些把原装线呵护得像宝贝亲儿子似的人,建议还是买品胜的线,和原装线一样尺寸。
目前25元的背后都已集成了watch充电器位置。
有定制需要的请私信联系。
以下是猛男粉色:
以下是车载版本:在背后的球头是17mm,可自行替换。
以下是外贸版本的介绍以及贵10元的理由!:
不是为了多赚钱!!!!
外贸版本在两侧的支撑臂内加入了90mm长的钢条作为支撑,防止海运造成的折断。
同时增加了尾部支撑杆,可以使得支架可以平放。
2022年起所有转运仓收货地址的,必须购买外贸版本,拍普通版本的不发货。
外贸版照片:
两侧的支撑臂内(红色处)加入了钢条作为支撑
尾部增加了平放支撑杆:
支架上增加了3个磁铁:
支撑杆可以让整个支架平放,用于一些特殊的无线耳机的充电
尾部支撑杆不用的时候是收纳在磁吸处的,增加了支架整体重量,增强了稳定度。
最新的可调角度版本可以调整倾角,最大可以放平,增加配zhong。