2023手持便携频谱分析仪35M-4400MHz测试实验室射频RF高频EMC整改
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
批量生产,品质有保证。大量用于测试144 vhf、 430 uhf、对讲机、遥控器、Lora、蓝牙,wifi,雷达模块,EMC和EMI整改。快速测试无线信号频率和强度。
工程师日常测试,生产线检测产品,都是很方便的。
注意:Lora和蓝牙测试,使用定频持续发射时容易测试。
使用天线来接收无线信号时,尽量靠近信号源测试。
可开发票。
完整的操作演示视频找客服获取。
1、尺寸:145mm*70mm*30mm。
2、重量:350g(含电池)。Weight: 350g (including battery).
3、采用 stm32f407 单片机(主频 168M )+4.3 寸 TFTLCD (480*800)彩色
液晶屏幕。
4、全铝合金外壳+旋转编码器控制+全英文显示界面+usb 供电。
5、支持 usb 供电和锂电池供电两种模式。
1、Product description
(1).Size: 145mm * 70mm * 30MM.
(2) .Weight: 250g (excluding battery). Weight: 350g (including battery).
(3). Adopt stm32f407 single chip computer (main frequency 168m) + 4.3-inch
TFTLCD (480 * 800) color LCD screen.
(4). All aluminum alloy shell + rotary encoder control + all English displayinterface + USB power supply.
(5). USB power supply and lithium battery power supply are supported.
性能指标
1、频谱显示范围:35M-4400Mhz;输入阻抗:50 欧姆。
2、RBW:10khz、50khz、100khz、200khz、500khz 共计 5 个档位可调。
3、屏幕扫描点数:700 点。
4、扫描跨度:7M(10Khz)、35M(50khz)、70M(100Khz)、140M(200Khz)、
350M(500Khz)。
5、dBm 范围:-80dB -----10dB(支持手动调整校准幅度),本机内部不带
放大电路,如需要测量小信号,需要外置放大器。
6、最大接入信号:10dB。
7、工作方式:超外差扫描式频谱仪,单次扫描时间 800ms。
2. Performance index
(1). Spectrum display range: 35m-4400mhz; input impedance: 50 ohm.
(2). RBW: 10kHz, 50KHz, 100kHz, 200kHz and 500KHz are adjustable.
(3). Number of screen scanning points: 700.
(4). Scanning span: 7m (10kHz), 35m (50KHz), 70m (100kHz), 140m (200kHz),
350m (500KHz).
(5). DBM range: - 80dB ----- 10dB (support manual adjustment of calibration
amplitude). There is no amplification circuit inside the machine. If small signal
needs to be measured, external amplifier is required.
(6). Maximum access signal: 10dB.
(7). Working mode: superheterodyne scanning spectrometer, single scanning time
800ms.