免焊接8节18650锂电池充电宝外壳移动电源电路板套件料diy电池盒
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
温馨提示:标价是1个电源盒的价格,不含电池,电池要另外购买。
要用平头18650锂电池3.7V(长度65MM*宽度18MM),尖头/带保护板/5号和7号电池不可用
需要电池自己另外在本店购买,买回去装好电池才可以使用。
安装电池一定要注意正负极,装反会烧坏了,电池有破皮不要用,烧坏自已负责
10W标准版功能参数
安装好电池后,给电源盒输入充电激活一下
1.两个输入口:一个MIRO安卓插孔,一个Type-C乐视华为插孔。
输入电压:5V (不要用带有9V和12V电压充电器充电)
输入电流:1A-2A (要用1A-2A电流,不要用超过2.2A电流充电)
2.两个输出口:输出5V 2A (两个口电流2A)
3.长按功能键开关手电筒.
18W快充版功能参数:要支持同样的协议才能快充
安装好电池后,给电源盒输入充电激活一下
1.两个输入口:一个MIRO安卓插孔,一个Type-C乐视华为插孔(支持双向)。
2. 任何一个 USB 口都可以支持快充,同时使用两个及以上输出口时,只支5V。
3. 快充规格
集成 QC2.0/QC3.0 输出快充协议
集成 FCP (华为高压快充协议)输入/输出快充协议
集成 AFC(三星快充协议) 输入/输出快充协议
集成 SFCP(展讯快充协议) 输入/输出快充协议
集成 MTK PE+ 1.1&2.0 (联发科快充协议)输出快充协议
集成 USB C DRP 协议,支持输入输出快充
兼容 BC1.2、苹果、三星手机快充
集成 USB Power Delivery (PD2.0/PD3.0 )协议
支持 PD2.0 双向输入/输出协议
支持 PD3.0 输入/输出,PPS 输出协议
支持 5V,9V,12V 电压档位输入/输出
PPS 支持 5~11V
4. 充电规格:电池端充电电流最高可达5.0A,自适应充电电流调节
5. 放电规格 同步开关放电 5V 2A 效率达 95%,支持 输出电流能力:5V/3.1A; 9V/2.0A;12V/1.5A
6.长按功能键开关手电筒.
22.5W闪充+快充功能参数:要支持同样的协议才能闪充和快充
安装好电池后,给电源盒输入充电激活一下
--电流高达 5A,效率高达 96%
支持 4.2/4.35/4.4/4.5V 电池类型
支持 JEITA 规范
支持温度环控制
--同步升压
输出功率高达 22.5W,效率高达 95%
自动负载检测/轻载检测
--输出快充协议
支持 PPS/PD3.0/PD2.0
支持 QC4+/QC4/QC3.0/QC2.0
支持 AFC
支持 FCP
支持 SCP
支持 PE2.0/PE1.1
支持 SFCP
支持低压直充
--输入快充协议
支持 PD3.0/PD2.0
支持 AFC
支持 FCP
支持 SCP
支持 PE1.1
注意:装上电池后,要对电池做一次完全充放电均衡后,数字电量显示才准确!具体方法: 装好电池先放电,就是给手机充电使用,一直到电量用完关机,然后再给电源充电,一直充到显示是充满,然后就可以正常使用了.(切记!均衡后如果取下电池,更换电池的话,需要重新再做均衡)
注意:安装好电池先不要盖盖子.试用3天左右,没有问题了再盖上盖子.因为盖子盖好反复拆开会损坏的上盖卡扣.
温馨提示:标价是1个电源盒的价格,不含电池,电池要另外购买。
要平头18650锂电池3.7V(长度65MM*宽度18MM),尖头和带保护板电池不可用(5号和7号电池不可用
需要电池自己另外在本店购买,买回去装好电池才可以使用。
安装电池一定要注意正负极,装反会烧坏了,电池有破皮不能用。
8节标准版1代功能介绍:
1.两个输入口:2个MIRO安卓插孔
输入电压:5V (不要用带有9V和12V电压充电器充电)
输入电流:1A-2A (要用1A-2A电流,不要用超过2.2A电流充电)
2.两个输出口:输出5V 2A (两个口电流2A)
3.双击为打开手电筒.
4.充放电保护,电路板内置锂电池保护IC,有过压保护,过流保护,欠压保护等。
外形尺寸:长16.2cm*宽8.2*厚2.2cm
注意:装上电池后,要对电池做一次完全充放电均衡后,数字电量显示才准确!具体方法: 装好电池先放电,就是给手机充电使用,一直到电量用完关机,然后再给电源充电,一直充到显示是充满,然后就可以正常使用了.(切记!均衡后如果取下电池,更换电池的话,需要重新再做均衡)
不可拆卸标准版8节介绍:
功能:
1.两个输入口:一个MIRO安卓插孔,一个Type-C乐视华为插孔。
输入电压:5V (不要用带有9V和12V电压充电器充电,会损坏电路板)
输入电流:1A-2A (要用1A-2A电流,不要用超过2.2A电流充电)
两个口可以同时输入,总电流不要超过2.2A,建议一个5V 2A输出就可以
2.两个输出口
输出5V 2A (两个口电流2A)
3.双击为打开手电筒.
4.充放电保护,电路板内置锂电池保护IC,有过压保护,过流保护,欠压保护等。
注意:装上电池后,要对电池做一次完全充放电均衡后,数字电量显示才准确!
具体方法: 装好电池先放完电,就是给手机充电使用,一直到电量用完关机,然后再给电源充电,一直充到显示是充满,然后就可以正常使用了.
(切记!均衡后如果取下电池,更换电池的话,需要重新再做均衡)
注意:安装好电池先不要盖盖子.试用3天左右,没有问题了再盖上盖子.因为盖子盖好反复拆开会损坏的上盖卡扣.